SpeakerBuilding.com
Search:
  HOME    ABOUT    FEEDBACK    HELP    FAQ    The Speaker Building Page, 20 Jul 2008 
Main Menu
News
Articles
DIY Projects
Kits
Speaker Design
Drivers
Software

Pages
1 System Introduction
2 2nd step: Measurement of Unit characteristics
3 4th step: Measurement
4 5th step: Crossover network design
5 Part List

Figures
1 Picture of the finished M2
2 Enclosure design plan
3 Impedance measurement of woofer unit
4 Impedance measurement of tweeter unit
5 Treatment for woofer frame resonance
6 Ground plane method
7 SPL of woofer (W/O X-over)
8 SPL of tweeter (W/O X-over)
9 The X-over network
10 Picture of the X-over network
11 SPL result of M2
12 Impedance result of M2

Home : DIY Projects Page 5 of 5

Making of M2

By Man-Sun Huh
21 Feb 2000

Part List

Units
Tweeter Scan-speak D2905/9900: 2 ea.
Woofer SEAS W17E002: 2 ea.

Network
Capacitor
Cresendo 4.0 uF: 2 ea.
Zen 6.0uF: 6 ea.

Resistor
Ohmite 10.0 Ohm 10Watt: 2 ea.
Ohmite 2.0 Ohm 10Watt: 2 ea.

Coil
Air-core 3.3mH 14AWG: 2 ea. (Woo! How big it is!!)
Air-core 0.8mH 14AWG: 2 ea.
Air-core 0.16mH 14AWG: 2 ea.
Air-core 1.2mH 18AWG: 2 ea.

Miscellaneous
Dupon Dacron: Around 3/5 of enclosure internal volume is needed.
Back cup: 2 ea.

Specification
System: Bass reflex 2-Units 2-Way system
Drivers: 28mm soft dome tweeter (Scan-speak D2905-9900 Revelator)
6.5" Magnasium cone (SEAS W17E002)
Crossover Frequency: 1,650 Hz
Sensitivity: 84 dB (1m/2.83V)
Impedance: 8 Ohm
Frequency range: 45 Hz - 20 KHz
Size: 400 x 220 x 290 mm (H x W x D)
Weight: approximately 14Kg/each

Man-Sun Huh

About the author
About the
author

Print this article
Print this
article

Email this article
Email this
article

^ Top
< Previous Page    
 
Copyright © 1995-2005 Roy Viggo Pedersen. All rights reserved.
About | Feedback | Help | FAQ